If you are a Chevy owner, you know that brakes are one of the most important parts of your car. They keep you safe and help to stop the vehicle when needed. But what if your brakes start showing signs of wear or damage? You may need brake repair at your Chevy dealer in Sallisaw, OK sooner than later! Here are five signs to keep an eye out for.
1. Clicking Noise
In some vehicles, the brake pads are firmly held in place by a specialized holder. In other cars, these are held in place with clamps, bolts, or pins. Regardless of the method used, the main objective behind these designs is to keep the brake pads from moving about. If they become unfastened, they will begin to rattle. When this occurs, you will then hear a clicking sound when the brake pedal is pressed or released.
2. Brake Fade
Brake fade is a technique commonly used when driving down a mountain slope or along a twisting road. However, if you use this technique regularly, your braking system can get damaged. Components will get heated as a result of forcing the brake pads to make contact with the rotors for an extended duration. Eventually, their capacity to generate the appropriate friction against each other diminishes with time and you’ll soon notice that your automobile won’t stop as quickly as it once did.
3. Nose Pulls to One Side
Brake pads on your vehicle don’t always wear down at the same rate. Those on one side may become thinner than those on the other from time to time. If this happens, the automobile may pull a little to the left or right as soon as you apply the brakes. And if you leave this issue unchecked, you’ll put your steering rack under needless strain. This is a problem you shouldn’t just put off. Bring your car to your local dealer and have a mechanic investigate the problem as soon as possible.
4. Brake Pedal Vibrates
Is the brake pedal spontaneously shaking when you step on it? It’s possible that your brake pads are to blame. A specific type of resin is used to keep the brakes together, and as each brake pad wears down, the adhesive becomes hot and is smeared across the rotor. It will then form an evenly distributed layer in ideal situations. However, if the resin isn’t properly dispersed, the pads may overheat and as a result, your brake pedals can vibrate uncontrollably
5. Squealing Noise
Most brake pads nowadays have built-in “wear indicators.” The only function of these gadgets is to produce a piercing noise as the brake pad wears down to a critical level, scraping against the rotor. The distinct sound signals the driver that his or her present brake pads are in danger of completely disintegrating.
If any one of these signs sounds familiar to you, contact Blue Ribbon Chevrolet Buick GMC today by giving us a call at 855-608-2021. You can also visit our showroom at 1701 S Kerr Blvd in Sallisaw, Oklahoma, and our friendly staff will tend to your automobile’s needs.
Connect with us
